Low ATM trailers

PDF version

PDF: 760 KB ReadSpeaker

On this page:

Background

Regulating road vehicles is part of how the Australian Government keeps Australians safe on our roads.

New legislation will ensure vehicles in the Australian market are safe, secure and environmentally-friendly.

Later this year, the Road Vehicle Standards Act 2018 (RVSA) will replace the Motor Vehicle Standards Act 1989 (MVSA).

The Road Vehicle Standards Rules 2019 are made under the RVSA. Together, they form the Road Vehicle Standards (RVS) legislation.

What is changing for the trailer industry?

Under the RVS legislation, manufacturers and importers of trailers with an aggregate trailer mass (ATM)* of 4.5 tonnes or less (low ATM trailers) will need an approval (a vehicle type approval or concessional Register of Approved Vehicles entry approval) before they can provide a trailer type to the Australian market.

Under the MVSA, trailer manufacturers and importers can self-certify that a trailer complies with Vehicle Standards Bulletin 1 (VSB1—Building Small Trailers).

This certification has been included on the trailer's identification plate—but it hasn't been necessary to notify the government.

This will change.

Every road vehicle—including trailers—will need to have vehicle and compliance information listed on the Register of Approved Vehicles (RAV) online database.

Only then can they be provided to Australian consumers for the first time.

The vehicle standards for trailers will still be the applicable Australian Design Rules (ADRs).

We will update Vehicle Standards Bulletin 1 to have easy-to-read information about the ADR requirements for most trailers and the most used ways to show they comply.

Some manufacturers may need to refer directly to the ADRs to confirm they comply.

Two approval pathways will be available:

  • vehicle type approval, and
  • concessional RAV entry approval.

These pathways have different eligibility criteria and approval conditions, if an approval is granted.

*ATM = the trailer's total mass when carrying the maximum load recommended by the manufacturer.

Vehicle type approvals

Under the RVS legislation, trailer manufacturers and importers providing more than 4 low ATM trailers to the Australian market in a 12-month period will have to get a vehicle type approval for their trailer type.

A vehicle type approval covers a make of trailer and a trailer category. This may include any number of models that meet the definition of a trailer with a vehicle category code of TA, TB or TC.

A vehicle type approval application must include a declaration that trailers provided under the approval, if granted, will comply (or substantially comply) with the relevant national road vehicle standards.

Concessional RAV entry approvals (4 trailers or less in a 12-month period)

Manufacturers or importers may apply for a concessional RAV entry approval for 4 low ATM trailers or less in a 12-month period. These vehicles will be entered onto the RAV, on behalf of an approval holder, vehicle by vehicle.

Applications for concessional RAV entry approval must also include a declaration that the trailer complies (or will comply) with the relevant national road vehicle standards at the time the vehicle is entered onto the RAV.

Eligibility requirements for a vehicle type approval

To be able to grant a vehicle type approval, the government must be satisfied the applicant:

  • has the required information demonstrating the road vehicle complies with the applicable national road vehicle standards (in rare cases, non-compliance will be permitted if the non-compliance is only in minor and inconsequential respects or the vehicle complies to an extent that makes it suitable for use on a public road in Australia—e.g., glider trailers with a longer rear overhang), AND
  • has control or has access to information about the design, componentry and manufacturing process of the road vehicle type, including changes that may impact compliance with the applicable national road vehicle standards, AND
  • can ensure the design, componentry and manufacturing process will consistently produce the type of road vehicle, AND
  • can arrange for the Secretary or an inspector to inspect the premises where the road vehicle or componentry for the road vehicle is manufactured, AND
  • can access and provide original and subsequent versions of supporting information, AND
  • can ensure the supporting information for the approval is kept up-to-date, AND
  • will comply with each of the standard and specified conditions that the vehicle type approval will be subject to.

Transitional arrangements

Our online IT portal, ROVER, integrates all RVS legislation activities and approvals.

To apply for a vehicle type approval, you must first set up an account in ROVER and fill out an online application form. This includes all of the required information, documents and declaration so your application can be assessed.

How do I apply?

The department uses an online IT service, ROVER, which integrates all RVS legislation activities and approvals.

To apply for a vehicle type approval under the RVS legislation, you must create an account in ROVER and complete an online application form providing all of the required information, documents and declaration so that your application can be assessed.

Note: Applications are not open yet. Applications for a vehicle type approval will commence on 1 July 2021.

Complying with your responsibilities

The Department of Infrastructure, Transport, Regional Development and Communications (the department) monitors and enforces compliance with the RVS legislation. The department encourages voluntary compliance, and undertakes informed risk-based compliance activities to confirm compliance with the RVS legislation.

More information

More detailed information will be available soon in the Guide to vehicle type approvals for trailers with an aggregate trailer mass (ATM) of 4.5 tonnes or less.

If you have an enquiry, please contact us:

Print

Last Updated: 18 January, 2021